Audi / A1 (8X) / 03 - brake electronics Bosch 8.2 (ABS 8.2 front) CAN / coding

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 63x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

This unit uses long coding, which is encrypted in the VIN. On this page, go to the card -Coding- fill-in the essential data and the code shall be calculated directly for your vehicle.

Warning:
The control unit may be blocked for a new code and thus require a special diagnostics mode. For this mode, contact the manufacturer of your diagnostics device.

Log-in