Audi / A3 (8P) / 03 - Brake electronics MK60 EC1 / adaptation - response - extended electronic differential lock (XDS)

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- the extended differential lock XDS is assigned to the current EDS and upon sharp run through a bend, it slightly applies braking pressure to the inner wheel to reduce its slip.

Note:
- this is intervention in the safety system of the vehicle and it is not recommended to change the factory settings!

connect with the control unit XX - Brake electronics

XX - Adaptation channel XXX

enter value:
X = extended electronic differential lock - mean value
X = extended electronic differential lock - low
X = extended electronic differential lock - high

Test

Save

switch ignition off for XXs

Log-in Buy