Audi / A3 (8P) / 17 - dashboard / Adaptation of Long-life intervals after replacement of dashboard

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

connect with the control unit XX - Dashboard

distance from: previous service inspection

XX - Adaptation channel XX

enter value:
distance od: previous service inspection

(value from old control unit is entered)

entered in hundreds (for instance: XX.XXXkm enter as XXXXX)

if unknown, enter: XXXXX

Test
Save

time from: previous service inspection

XX - Adaptation channel XX

enter value:
time from: previous service inspection

(value from old control unit is entered)

entry possible after: X day (for instance: XXX days enter as XXXXX)

if unknown, enter: XXXXX

Test
Save

minimum distance for indication of INSP

XX - Adaptation channel XX

automatically adapts after coding

maximum distance for indication of INSP

XX - Adaptation channel XX

automatically adapts after coding

maximum time for indication of INSP

XX - Adaptation channel XX

automatically adapts after coding

oil quality

XX - Adaptation channel XX

automatically adapts after coding

consumed fuel counter

XX - Adaptation channel XX

(value from old control unit is entered)

if unknown, enter: XXXXX

Test
Save

smokiness counter

XX - Adaptation channel XX

(value from old control unit is entered)

if unknown, enter: XXXXX

Test
Save

oil thermal load counter

XX - Adaptation channel XX

(value from old control unit is entered)

if unknown, enter: XXXXX

Test
Save

Note:
if XXXXX has been entered in any channel, it is necessary to unconditionally do service inspection!

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy