Audi / A3 (GY) / 4B - Multifunction Module [EV_MultiModulContiVW38X 004012] / Adjustment of the headlights

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 7x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- Headlights = ON
- the vehicle must stand on even ground
- Error memory empty

if the vehicle is equipped with the system: XX - clearance height control: first execute the function: XX - clearance height control -> Workshop jack mode -> activation

connect with the control unit XB - Multifunctional module

X)
XX - Basic settings

select item in drop-down menu: IDEXXXXX-MASXXXXX - Headlights - basic settings - step X

Start

wait XXs

do not switch-off the ignition and do not break the communication - basic settings = ON

X)
further do

X)
XX - Basic settings - Stop

select item in drop-down menu: IDEXXXXX-MASXXXXX - Headlights - basic settings - confirmation step X

Start

wait XXs

delete error memory

if the vehicle is equipped with the system: XX - clearance height control: further, do: XX - clearance height control -> Workshop jack mode -> activation

XX - end of communication

End of test

Created on: XX.X.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Jan)
Special thanks to: Petr Sevcik

Log-in Buy