Audi / A3/S3/Cabrio (8V) / 09 - Central electrics [EV_BCMCONTI 009001] / Automatic lights - Daytime running lights - settings

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- the feasibility of this test may depend on the equipment of the control unit

connect with the control unit XX - central electrics

XX - Security access

enter value: XXXXX

if it shall not be accepted, the unit does not require a safe approach

Start

XX - Adaptation

select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - Daytime running lights

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

Read

enter value:

Automatic lights = Automatic lights - active
inactive = Automatic lights - inactive
Permanent running lights = Permanent running lights - active

Start

XX - Adaptation

select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - BAP

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

Read

enter value:

active = Automatic lights - active
inactive = Automatic lights - inactive

Start

XX - Adaptation

select item in menu: IDEXXXXX-ENGXXXXXX - Automatic lights - factory settings BAP

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

Read

enter value:

active = Automatic lights - active
inactive = Automatic lights - inactive

Start

XX - Basic settings

select item in menu: zeroing learning values

Start

wait XXs

back

XX - end of communication

switch ignition off for XX s

Log-in Buy