Audi / A4 (8E) / 03 - Brake electronics BOSCH 5.7 / coding

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- coding is made accessible only after Login.
- after successful coding, it is necessary to adapt the steering wheel turn angle sensor .
- special coding is used for BFB engines with XLT brakes and multitronic XXXXX .

Model :
X ? x x x

X = Audi AX

brakes:
X x ? x x

X = CXX (PR-XLR)
X = FNX XX" (PR-XLB/XLE)
X = HPX XX" (PR-XLX)
X = FNR XX" (PR-XLG)
X = FNX XX" (PR-XLT/XLF)
X = Brembo XX" (PR-XLJ)

engine:
X x x ? x

X = X/X cylinder diesel
X = X/X cylinder Gasoline
X = X/X cylinder Gasoline

gearbox:
X x x x ?

X = manual gearbox
X = automatic transmission (XHPXX, XHPXX, AGX, AGX)
X = multitronic

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy