Audi / A4 (8E) / 55 - Xenon headlamp levelling Xenon Plus / adaptation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- only control unit XPX-XXX-XXX-C - software version XXXX and newer
- when driving in countries with LHD, the settings of the reflector must be changed to prevent bedazzlement of oncoming vehicles

connect with the control unit XX - Control of xenon headlight bevel

XX - Security access
enter value: XXXXX

Note:
- if it shall not be accepted, the unit does not require a safe approach

XX - Adaptation channel XXX
enter value:

X = prevention of glare inactive
X = prevention of glare active

Test
Save

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy