Audi / A4 (8K) / 03 - Brake electronics MK70 / basic settings

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

Conditions:
- ignition = ON

connect with the control unit XX - Brake electronics

XX - Basic settings group XXX
Start
OFF/ON/next

system indicator light: tyre-pressure monitoring (KXXX) - blinks

XX - end of communication

inflate the tyres to the required pressure

press and hold button - tyre-pressure monitoring (EXXX) + ASR/ESP (EXXX)

wait X s

system indicator light: tyre-pressure monitoring (KXXX) - on

release button - tyre-pressure monitoring (EXXX) + ASR/ESP (EXXX)

desired condition:

system indicator light: tyre-pressure monitoring (KXXX) - off

Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in