Audi / A4/S4 USA (FL) / 3C - Lane Change [EV_LaneChangAssis 001020] / Brightness setting of warning lights in the exterior mirrors

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
• This procedure may require the hood to be opened or the SFD protection to be unlocked

connect with the control unit XC - Lane change assist

XX - Security access

enter value:

XXXXX = function accessible: adaptation

(if it shall not be accepted, the unit does not require a safe approach)

Start

XX - Adaptation

select item in drop-down menu:

IDEXXXXX warning - brightness - Characteristics

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

select item in drop-down menu: brightness

Start

XX - end of communication

switch ignition off for XXs

End of test

Log-in Buy