Audi / A5 (8F) / 16 - Steering column electronics (Lenks.Modul H10-17) / installation of component - cruise control

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- done after installation of a component: cruise control

connect with the control unit XX – steering wheel electronics

XX - Coding

Coding Assist

change value - BYTE XX (the first byte in the sequence is counted as the zero byte):

xxxxXXxx = cruise control - not installed
xxxxxXxx = Cruise Control (CCS) - installed
xxxxXXxx = Adaptive Cruise Control (ACC) - installed

Press the down arrow on the keyboard and close the coding calculator

Start

XX - end of communication

switch ignition off for XX s

Log-in Buy