Audi / A5 (8F) / 19 - Gateway (GW-BEM 5CAN) CAN / Battery - replacement: adaptation II

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- the feasibility of this test may depend on the equipment of the control unit

connect with the control unit XX - Gateway

XA - Adaptation II channel XX

enter value: PPPPPPPPPPP_VVV_SSSSSSSSSS

PPPPPPPPPPP = order number - see manufacturer’s label
for instance:
XDXXXXXXXHA enter as XDXXXXXXXHA
XDXXXXXXXH enter as XDXXXXXXX_

TIP:
if the order number is in ten-digit format, insert two spaces between the order number and the manufacturer’s name. If it is in eleven-digit format, insert one space.

VVV = manufacturer - see manufacturer’s label
UMX = Akuma
VAX = Varta
BAX = Banner
MLA = Moll
TUX = Exide
JCB = JCI
XDO = Boading

SSSSSSSSSS = Battery - serial number BEM - see manufacturer’s label
for instance: XXXXXXGXQX

_ = spacing (gap)

Picture documentation:

+ battery_coding

Test

Save

switch ignition off for XX s

Log-in Buy