Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Audi / A5 (F5) / 6D - Rear gull-wing door HDSG-Modul (EV_HDSGVW428 | EV_DeckLidContrUnit | EV_HDSGVN46T | EV_HDSGAU316) UDS / Default settings of the tailgate
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 5x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
done after repair of components:
- rear lid/tailgate/boot lid - engine X (VXX)
- rear lid/tailgate/boot lid - engine X (VXX)
- rear lid/tailgate/boot lid - control unit
- rear lid/tailgate/boot lid
Conditions:
- tailgate - closed
connect with the control unit XD - gull-wing door
XX - Basic settings
select item in menu - IDEXXXXX - setting of the angle of gull-wing doors
(For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window )
do not interrupt communication
press the switch in the door handle, the door starts opening and for the entire duration of the opening process, a regular beep is emitted
the door runs to terminal position, it is necessary to leave the door here until a quick double beep is heard
press the button on the door to close, for the duration of the closing process, a regular beep is heard until full closure and locking
End basic set-up
XX - end of communication
Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
- rear lid/tailgate/boot lid - engine X (VXX)
- rear lid/tailgate/boot lid - engine X (VXX)
- rear lid/tailgate/boot lid - control unit
- rear lid/tailgate/boot lid
Conditions:
- tailgate - closed
connect with the control unit XD - gull-wing door
XX - Basic settings
select item in menu - IDEXXXXX - setting of the angle of gull-wing doors
(For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window )
do not interrupt communication
press the switch in the door handle, the door starts opening and for the entire duration of the opening process, a regular beep is emitted
the door runs to terminal position, it is necessary to leave the door here until a quick double beep is heard
press the button on the door to close, for the duration of the closing process, a regular beep is heard until full closure and locking
End basic set-up
XX - end of communication
Created on: X.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.