Audi / A8 (4E) / 15 – Airbag / Adaptation - Airbag 9.41

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

connect with the control unit XX – Airbag

ESP data - drive

XX - Adaptation channel XX

enter value:
X = Front wheel drive
X = all-wheel-drive

Test
Save

ESP data - brakes

XX - Adaptation channel XX

enter value:

XX = front: CXX / rear: CXX (PR-XLR+XKD)
XX = front: FNX XX" / rear: CXX (PR-XLB/XLE+XKD)
XX = front: FNR GXX XX" / rear: CII XX (PR-XLA/XLC/XLD-XKW)
XX = front: FNR GXX XX" / rear: CII XX (PR-XLJ+XKE)
XX = front: Brembo MX XX" / rear: CII XX (PR-XLU+XKY)

XX = front: Brembo MX XX" / rear: CII XX (PR-XLF+XKY or PRXLV+XEG)

Test
Save

component security

XX - Adaptation channel XX

enter value:
XXXXX = initiation of programming process - VIN

Test
Save

Created on: XX.XX.XXXX X:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in