Audi / A8 D4 (4H) / 19 - Gateway J533 Gateway [EV_GatewPkoUDS 001016] / Battery - replacement: adaptation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- the feasibility of this test may depend on the equipment of the control unit

connect with the control unit XX - Gateway

adaptation

serial number

select item in menu: IDEXXXXX-IDEXXXXX - Adaptation: Battery - serial number

TIP: For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

enter value: serial number - see manufacturer’s label BEM - if unknown, enter: XXXXXXXXXX

Start

manufacturer:

select item in menu: IDEXXXXX-MASXXXXX - adaptation: Battery - manufacturer

TIP: For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

select item in menu:

VAX = Varta
TUX = Exide
JCB = JCI
MLA = Moll
XDO = JFF Boading
BAX = Banner
EPN = EPN
miscellaneous = miscellaneous

see manufacturer’s label BEM - if unknown, enter miscellaneous

Start

capacity:

select item in menu: IDEXXXXX-MASXXXXX - adaptation: Battery - capacity

TIP: For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

enter value: Battery - capacity

Start

Picture documentation:

+ battery coding BEM code

XX - end of communication

switch ignition off for XX s

End of test

Created on: XX.X.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
Special thanks to Jiri Hlousek

Log-in Buy