Audi / Audi A1 (GB) / 44 - Steering booster [EV_SteerAssisTRWG4LMQBA0 011016] / Zeroing of the manufacturer’s settings (After an accident)

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
• done during...: After an accident

connect with the control unit XX - steering booster

XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in menu: IDEXXXXX - zeroing learning values

Start

End basic set-up

back

XX - Basic settings

select item in menu: IDEXXXXX - Zeroing of the manufacturer’s settings

Start

End basic set-up

further, do:
- coding
- adaptation
- Setting of steering wheel turn angle sensor (GXX)

Log-in Buy