Audi / Audi A8 (F8) / 03 - Brake electronics Bosch ESP 9 Plus/Premium CMP [EV_ESP9BOSCHCMP 004011] / Tyre-pressure monitoring - basic settings

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

disconnect - diagnostic cable

set the air pressure in the tyres according to the prescribed values for the given vehicle

press and hold: button ASR/ESP + button Tyre-pressure monitoring

wait X s

desired condition - system indicator light - Tyre-pressure monitoring - off

Log-in