Audi / Q2 (GA) / 44 - Steering booster [EV_SteerAssisMQB 013144] / Zeroing of software stop

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 2x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

Conditions:
- test / wheel alignment

connect with the control unit XX - steering booster

XX - Security access

enter value: XXXXX

alternnatively use: XXXXX - turn off the ignition between individual attempts (MIN XXs)

Start

XX - Adaptation

select item in menu: IDEXXXXX - Download

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

Read

enter value:

active

Start

XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in menu: IDEXXXXX - Zeroing of software Stop

Start

further, do: XX - brake electronics -> Setting of steering wheel turn angle sensor (GXX)

Log-in