Audi / Q3 (8U) / 09 - central electrics (BCM PQ35) CAN / adaptation - comfort closing - confirmation via horn

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- the feasibility of this test may depend on the equipment of the control unit
- upon pressing the button, the vehicle confirms reception of signal, e.g. blinking lights, horn, etc.

connect with the control unit XX - Central electrics

XX - Adaptation channel XXX
Read

enter value: comfort closing - confirmation via horn

XXXX = inactive
XXXX = active

Test
Save

switch ignition off for XX s

Log-in Buy