Audi / Q3 (8U) / 09 - central electrics (BCM PQ35) CAN / adaptation - headlight washers

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 2x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- the feasibility of this test may depend on the equipment of the control unit

- this adaptation makes it possible to set: the number of activations of the windscreen washer nozzles, which do not result in the activation of the headlight wash nozzles

connect with the control unit XX - Central electrics

XX - Adaptation channel XXX
Read

enter value: XXXX - XXXX
for instance: XXXX = the number of activations of the windscreen washer nozzles, which do not result in the activation of the headlight wash nozzles = X

factory settings = XXXX

Test
Save

switch ignition off for XX s

Log-in Buy