Audi / Service intervals - Audi / Vehicles up to 2000 / reset of service intervals

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 2x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

connect with the control unit XX - Dashboard

XX - Adaptation channel XX (the distance counter to oil change)

enter value: distance to: oil change
entered in hundreds km
for instance: XXXXX km enter as XXX

Note:
- some older dashboards require input of value in thousands of km, e.g. XXXXX is entered as XXXXX

Test
Save

XX - Adaptation channel XX (the distance counter to service inspection (every XX XXX km))

enter value: distance to: service inspection
entered in hundreds km
for instance: XXXXX km enter as XXX

Note:
- some older dashboards require input of value in thousands of km, e.g. XXXXX is entered as XXXXX

Test
Save

XX - Adaptation channel XX (the distance counter to service inspection (every XX months))

enter value: time to: service inspection
for instance: XXX days enter as XXX

Test
Save

Log-in Buy