Audi / TT (8J) / 09 - central electrics (Bordnetz-SG Hxx) / wipers - repair | variable wiper parking position - deactivation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- done before deinstallation of a component: wipers, re-parking of wipers, wiper engine

connect with the control unit XX - Central electrics

XX - Coding

select item in drop-down menu: subsystem: wipers (Wischer)

As new coding, enter the current code of the unit

Start

switch ignition off for XXs

activate - wipers Xx

Now, the variable wiper parking position (APS) function shall be deactivated after XXX cycles and the engine shall be at its lowest position.

Log-in Buy