Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Audi / TT (8J) / 44 - steering booster 3. of generation (EPS_ZFLS Kl.x / J500__APA-BS KL) CAN / control unit - replacement
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
done after replacement of component:
- servo control - control unit
connect with the control unit XX - Power steering
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX - end of communication
connect with the control unit XX - Brake electronics
XX - Security access
enter value: XXXXX
Start
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - end of communication
connect with the control unit XX - Power steering
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
further, do:
- steering wheel turn angle sensor GXX Basic settings
done after replacement of component:
- servo control - control unit
connect with the control unit XX - Power steering
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX - end of communication
connect with the control unit XX - Brake electronics
XX - Security access
enter value: XXXXX
Start
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - end of communication
connect with the control unit XX - Power steering
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
XX - Adaptation channel XXX
enter value: XXXX
Test
Save
XX – error memory
delete error memory
further, do:
- steering wheel turn angle sensor GXX Basic settings
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.