Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator- Scan Explorer
Audi / TT/TTS/TTRS (FV) / 09 - Central electrics [EV_BCMMQB 015001] / Mode - Emergency service - fog lights - settings
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Pozná
· the feasibility of this test may depend on the equipment of the control unit
· This procedure may require the hood to be opened or the SFD protection to be unlocked
connect with the control unit XX - central electrics
XX - Security access
enter value:
XXXXX = function accessible: adaptation
(if it shall not be accepted, the unit does not require a safe approach)
Start
XX - Adaptation
select item in drop-down menu:
ENGXXXXXX-ENGXXXXXX - Dimming Direction CD XX
ENGXXXXXX-ENGXXXXXX - Dimmwert AB XX
ENGXXXXXX-ENGXXXXXX - Lasttyp XX
ENGXXXXXX-ENGXXXXXX - Lichtfunktion A XX
ENGXXXXXX-ENGXXXXXX - Lichtfunktion C XX
ENGXXXXXX-ENGXXXXXX - Lichtfunktion D XX
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
enter value:
channel inactive active
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ENGXXXXXX-ENGXXXXXX Dimming Direction CD XX maximize minimize
ENGXXXXXX-ENGXXXXXX Dimmwert AB XX X XXX
ENGXXXXXX-ENGXXXXXX Lasttyp XX inactive X - allgemeine Gluehlampe XXW
ENGXXXXXX-ENGXXXXXX Lichtfunktion A XX inactive Klemme XX mit Nachlauf bis Fahrzeugstillstand
ENGXXXXXX-ENGXXXXXX Lichtfunktion C XX inactive Fahrzeug ist nicht fahrbereit (engine laeuft nicht: Elektroantrieb nicht aktiv o.ae.)
ENGXXXXXX-ENGXXXXXX Lichtfunktion D XX inactive Fahrzeug mit Automatik Start-Stopp ist im Stopp-Modu
Start
XX - end of communication
switch ignition off for XXs
End of test
Direct parametrization file for VCDS (DPFV):
Activation
Deactivation
How to use parametrization files
DPFV Authenticator
· the feasibility of this test may depend on the equipment of the control unit
· This procedure may require the hood to be opened or the SFD protection to be unlocked
connect with the control unit XX - central electrics
XX - Security access
enter value:
XXXXX = function accessible: adaptation
(if it shall not be accepted, the unit does not require a safe approach)
Start
XX - Adaptation
select item in drop-down menu:
ENGXXXXXX-ENGXXXXXX - Dimming Direction CD XX
ENGXXXXXX-ENGXXXXXX - Dimmwert AB XX
ENGXXXXXX-ENGXXXXXX - Lasttyp XX
ENGXXXXXX-ENGXXXXXX - Lichtfunktion A XX
ENGXXXXXX-ENGXXXXXX - Lichtfunktion C XX
ENGXXXXXX-ENGXXXXXX - Lichtfunktion D XX
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
enter value:
channel inactive active
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ENGXXXXXX-ENGXXXXXX Dimming Direction CD XX maximize minimize
ENGXXXXXX-ENGXXXXXX Dimmwert AB XX X XXX
ENGXXXXXX-ENGXXXXXX Lasttyp XX inactive X - allgemeine Gluehlampe XXW
ENGXXXXXX-ENGXXXXXX Lichtfunktion A XX inactive Klemme XX mit Nachlauf bis Fahrzeugstillstand
ENGXXXXXX-ENGXXXXXX Lichtfunktion C XX inactive Fahrzeug ist nicht fahrbereit (engine laeuft nicht: Elektroantrieb nicht aktiv o.ae.)
ENGXXXXXX-ENGXXXXXX Lichtfunktion D XX inactive Fahrzeug mit Automatik Start-Stopp ist im Stopp-Modu
Start
XX - end of communication
switch ignition off for XXs
End of test
Direct parametrization file for VCDS (DPFV):
Activation
Deactivation
How to use parametrization files
DPFV Authenticator
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
