Audi / TT/TTS/TTRS (FV) / 03 - Brake electronics MK100 IPB ESC [EV_Brake1UDSContiMK100IPB 060017] / Deactivation of the longitudinal acceleration sensor on the test bed

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
Warning: During communication with the electronics control unit of the brakes when the vehicle is running, the ABS, eventually, ABS/EDS/ASR/ESP functions are deactivated, (indicated by the indicator lights) up to a speed of XX km/h After exceeding XX km/h, the control unit automatically interrupts communication and restores all functions

connect with the control unit XX - brake electronics

Security access

enter value: XXXXX

Start

XX - Basic settings

select item in menu: IDEXXXXX - Roller test station mode
enter value: X = OFF

activate default settings

longitudinal acceleration sensor = OFF

Upon completion of work

Stop

XX - end of communication

switch ignition off for XXs

Log-in Buy