Audi / TT/TTS/TTRS (FV) / 03 - Brake electronics MK100 IPB ESC [EV_Brake1UDSContiMK100IPB 060017] / Basic settings - transverse acceleration sensor G200; brake pressure sensor G201; turn angle sensor G202; longitudinal acceleration sensor G251

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- on-board voltage > XX V
- the vehicle must be standing on a level surface
- brake pedal: released
- Do not move the vehicle

connect with the control unit XX - brake electronics

XX - Login / XX or Coding II or XX - Security access

enter value: XXXXX

Start

XX - Basic settings

select item in menu: IDEXXXXX-ENGXXXXXX - basic settings - ESP unit

activate default settings

wait XXs

end

XX - end of communication

Log-in Buy