Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Engines / Diesel / 1.9/81kW TDI AHF;ASV EU 3 / setting of injection Start
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
- done only after successful check
remove timing belt cover
loosen the three bolts of the drive pulley of the injection pump
slightly turn the spindle of the injection pump
earlier = right side
later = left
check using the basic setting
Note:
- tightening torque is: XXNm + Xx o XX°
- after final setting, use new bolts
Created on: XX.XX.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Karolina)
- done only after successful check
remove timing belt cover
loosen the three bolts of the drive pulley of the injection pump
slightly turn the spindle of the injection pump
earlier = right side
later = left
check using the basic setting
Note:
- tightening torque is: XXNm + Xx o XX°
- after final setting, use new bolts
Created on: XX.XX.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Karolina)
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.