Engines / Diesel / 2.0/100/103kW TDI-PD-DPF BRE / Test of exhaust gases temperature sensor (G235; G495; 648)
Mark | Model | Control unit | Diagnostic operation |
---|
Mark
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- engine speed = idling
- engine temperature > XX°C
connect with the control unit XX - engine
XX - Measured values group XXX
observe values:
field X = actual value (temperature upstream of component: turbo blower)
field X = actual value (temperature upstream of component: Diesel Particulate Filter)
field X = actual value (temperature downstream of component: Diesel Particulate Filter)
increase rpm to XXXX rpm
desired condition:
field X = increasing - strongly
field X, field X = increasing - moderately
field X > field X > field X
for this test, it is suitable to use graphical representation VagScope
Picture documentation:
if values are not achieved - check component:
- temperature sensor
- wiring
- connector connections
- engine speed = idling
- engine temperature > XX°C
connect with the control unit XX - engine
XX - Measured values group XXX
observe values:
field X = actual value (temperature upstream of component: turbo blower)
field X = actual value (temperature upstream of component: Diesel Particulate Filter)
field X = actual value (temperature downstream of component: Diesel Particulate Filter)
increase rpm to XXXX rpm
desired condition:
field X = increasing - strongly
field X, field X = increasing - moderately
Picture documentation:
if values are not achieved - check component:
- temperature sensor
- wiring
- connector connections
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.