You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note: - after replacement of the DPF, the clogged filter remains in the control unit and must be deleted
- done after replacement of component: Diesel Particulate Filter (enter value: XX)
engine control unit (enter value from initial control unit) - if the clogging value from the initial unit, it is calculated in such a manner that the number of kilometres travelled on the DPF is divided by the coefficient XXXX and rounded down to full digits. E.g. XXX.XXX km divided by XXXX = XXX, filling is XXX.
connect with the control unit XX - engine
XX - Adaptation channel XXX enter value: soot clogging - required value
Test
Save
switch ignition off for: XXs
check of error memory
XX - end of communication
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Search:
Search area:
