Engines / Diesel / 2.0/103kW TDI-CR CBAx / Service regeneration of DPF - when vehicle is parked
Mark | Model | Control unit | Diagnostic operation |
---|
Mark
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 3x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- ignition = ON
- engine speed = idling
- fuel tank contents > &fracXX;
- engaged gear (N)
- engine temperature > XX °C (XX - Measured values group XXX field X)
- clogging of Diesel particulate filter < XXg (XX - Measured values group XXX field X or group XXX field X)
- appliances ON (Headlights, air-conditioning, Seat heating)
- bonnet: closed
Check of clogging level of Diesel particulate filter
connect with the control unit XX - engine
XX - Measured values group XXX, group XXX or XXX
observe values: group XX
field X = temperature upstream of component: turbo blower
field X = temperature upstream of component: Diesel Particulate Filter
field X = temperature downstream of component: Diesel Particulate Filter
observe values: group XXX
field X = clogging of Diesel particulate filter (calculated value)
field X = clogging of Diesel particulate filter (actual value)
observe values: group XXX
field X = clogging of Diesel particulate filter (calculated value)
field X = clogging of Diesel particulate filter (actual value)
DPF regeneration
connect with the control unit XX - engine
XX - Security access
enter value:
X-cylinder engine = XXXXX
X-cylinder engine Crafter = XXXXX
X-cylinder engine = XXXXX
Start
XX - Basic settings group XXX or select item in menu
Start
follow the diagnostics instructions
XX - Measured values group XXX, group XXX or XXX
observe values: group XX
field X = temperature upstream of component: turbo blower
field X = temperature upstream of component: Diesel Particulate Filter
field X = temperature downstream of component: Diesel Particulate Filter
observe values: group XXX
field X = clogging of Diesel particulate filter (calculated value)
field X = clogging of Diesel particulate filter (actual value)
observe values: group XXX
field X = clogging of Diesel particulate filter (calculated value)
field X = clogging of Diesel particulate filter (actual value)
leave the engine to run at higher idle speed until the clogging is close to zero.
end
Created on: XX.XX.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Karolina)
- ignition = ON
- engine speed = idling
- fuel tank contents > &fracXX;
- engaged gear (N)
- engine temperature > XX °C (XX - Measured values group XXX field X)
- clogging of Diesel particulate filter < XXg (XX - Measured values group XXX field X or group XXX field X)
- appliances ON (Headlights, air-conditioning, Seat heating)
- bonnet: closed
Check of clogging level of Diesel particulate filter
connect with the control unit XX - engine
XX - Measured values group XXX, group XXX or XXX
observe values: group XX
field X = temperature upstream of component: turbo blower
field X = temperature upstream of component: Diesel Particulate Filter
field X = temperature downstream of component: Diesel Particulate Filter
observe values: group XXX
field X = clogging of Diesel particulate filter (calculated value)
field X = clogging of Diesel particulate filter (actual value)
observe values: group XXX
field X = clogging of Diesel particulate filter (calculated value)
field X = clogging of Diesel particulate filter (actual value)
DPF regeneration
connect with the control unit XX - engine
XX - Security access
enter value:
X-cylinder engine = XXXXX
X-cylinder engine Crafter = XXXXX
X-cylinder engine = XXXXX
Start
XX - Basic settings group XXX or select item in menu
Start
follow the diagnostics instructions
XX - Measured values group XXX, group XXX or XXX
observe values: group XX
field X = temperature upstream of component: turbo blower
field X = temperature upstream of component: Diesel Particulate Filter
field X = temperature downstream of component: Diesel Particulate Filter
observe values: group XXX
field X = clogging of Diesel particulate filter (calculated value)
field X = clogging of Diesel particulate filter (actual value)
observe values: group XXX
field X = clogging of Diesel particulate filter (calculated value)
field X = clogging of Diesel particulate filter (actual value)
leave the engine to run at higher idle speed until the clogging is close to zero.
end
Created on: XX.XX.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Karolina)
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.