Engines / Diesel / 2.0/103kW TDI-CR CFFx;CFGx;CFHx;CLCx;CMGB UDS EDC17 C46 / Error message identification AdBlue SCR dashboard

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- engine speed = X rpm

Advanced Measured Values

select item in menu:

IDEXXXXX-ENGXXXXXX - Increase - Limited range
IDEXXXXX-Reducing agent - status
IDEXXXXX-Reducing agent - Level sensor

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

IDEXXXXX-ENGXXXXXX

XXXXXXXX (X) = Electric fault
XXXXXXXX (X) = Hydraulic fault
XXXXXXXX (X) = Dosing of the reducing agent - Defect
XXXXXXXX (X) = Efficiency - low - Generation of pressure
XXXXXXXX (XX) = Hydraulic fault - Pressure elimination
XXXXXXXX (XX) = SCR heating
XXXXXXXX (XX) = AdBlue - Quality
XXXXXXXX (XXX) = Defect SCR

IDEXXXXX-Reducing agent - status = X = FULL
IDEXXXXX-Reducing agent - Level sensor = actual value

End of test

Log-in Buy