Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator- Scan Explorer
Engines / Diesel / 2.0/103kW TDI-CR CFFx;CFGx;CFHx;CLCx;CMGB UDS EDC17 C46 / Test - Dosing of the reducing agent SCR AdBlue
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 2x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- engine speed = X rpm
- engaged gear = N
- activate the hand brake
- Reducing agent Concentration = OK
Note:
- duration approx XX minutes
connect with the control unit XX - engine
XX - Security access
enter value: XXXXX
Start
XX - Basic settings
select item in drop-down menu:
IDEXXXXX - Test - Dosing of the reducing agent SCR
In the Basic Settings window, click Measured values and select the items you want to visualize.
IDEXXXXX - pressure sensor SCR - actual value
IDEXXXXX - additive pump: excitation
IDEXXXXX-ENGXXXXXX - Flushing valve SCR Bits X-X
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
activate default settings (duration approx XX minutes)
required values - if displayed: IDEXXXXX-ENGXXXXXX = XX
IDEXXXXX - pressure sensor SCR = X - X,X bar
IDEXXXXX - additive pump = X - XX%
required values - if displayed: IDEXXXXX-ENGXXXXXX = XX
IDEXXXXX - pressure sensor SCR = X bar
duration approx XX minutes
desired condition:
basic settings: Successfully completed
if values are not achieved, check part:
- Dosing of the reducing agent: Check the leakproofness of the lines
- Dosing of the reducing agent: injector - tightness, Defect
- Dosing of the reducing agent: additive pump - Defect
End of test
- engine speed = X rpm
- engaged gear = N
- activate the hand brake
- Reducing agent Concentration = OK
Note:
- duration approx XX minutes
connect with the control unit XX - engine
XX - Security access
enter value: XXXXX
Start
XX - Basic settings
select item in drop-down menu:
IDEXXXXX - Test - Dosing of the reducing agent SCR
IDEXXXXX - pressure sensor SCR - actual value
IDEXXXXX - additive pump: excitation
IDEXXXXX-ENGXXXXXX - Flushing valve SCR Bits X-X
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
activate default settings (duration approx XX minutes)
required values - if displayed: IDEXXXXX-ENGXXXXXX = XX
IDEXXXXX - pressure sensor SCR = X - X,X bar
IDEXXXXX - additive pump = X - XX%
required values - if displayed: IDEXXXXX-ENGXXXXXX = XX
IDEXXXXX - pressure sensor SCR = X bar
basic settings: Successfully completed
if values are not achieved, check part:
- Dosing of the reducing agent: Check the leakproofness of the lines
- Dosing of the reducing agent: injector - tightness, Defect
- Dosing of the reducing agent: additive pump - Defect
End of test
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
