Engines / Diesel / 2.0/103kW TDI-CR CFFx;CFGx;CFHx;CLCx;CMGB UDS EDC17 C46 / Test - exhaust recirculation - potentiometer (G212)

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 1x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- ignition = ON
- engine speed = idling
- intake system - tightness = OK

connect with the control unit XX - engine

XX - Actuators

select item in drop-down menu:

IDEXXXXX - Change-over valve for the cooler of the exhaust gas recirculation

Start

desired condition: open / closed

In the Actuators window, click Measured values and select the items you want to visualize.

IDEXXXXX - exhaust gas return valve - actual value
IDEXXXXX-ENGXXXXXX - exhaust recirculation - high Pressure: Bits X-X

required values:

open - IDEXXXXX (exhaust gas return valve - actual value) = XX - XX %
closed - IDEXXXXX (exhaust gas return valve - actual value) = XX - XXX %

upon non--achievement of condition - check component:
- exhaust gas return valve
- wiring

Log-in Buy