Engines / Diesel / 2.0/103kW TDI-PPD BKP;BMA;BVE;BWV / basic settings - filling pressure controller
Mark | Model | Control unit | Diagnostic operation |
---|
Mark

Model

Control unit 

Diagnostic operation 

Diagnostic procedure
This operation was considered useful 2x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- engine speed = idling
- engine temperature >= XX°C
connect with the control unit XX - engine
XX - Basic settings group XXX
activate default settings
depress and hold - brake pedal + accelerator pedal
desired condition:
filling pressure controller - active / inactive
required values:
field X - deviation between active / inactive must be minimum XX mbar
for this test, it is suitable to use graphical representation
Picture documentation:
- engine speed = idling
- engine temperature >= XX°C
connect with the control unit XX - engine
XX - Basic settings group XXX
activate default settings
depress and hold - brake pedal + accelerator pedal
desired condition:
filling pressure controller - active / inactive
required values:
field X - deviation between active / inactive must be minimum XX mbar
for this test, it is suitable to use graphical representation
Picture documentation:
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.