Engines / Diesel / 2.5/128/120/96 kW TDI-PD AXE; BLJ AXD / Limitation of top speed

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- Adaptation is possible ONLY at lower value. It is not possible in future to adjust the value upwards. The only way to restore the upward adjustment is use of a new engine control unit.

connect with the control unit XX - engine

XX - Security access

enter value XXXXX

Start

XX - Adaptation channel XX

enter value: vehicle top speed
for instance: vehicle top speed XXX km/h - enter as XXXXX

Test
Save

switch ignition off for: XXs

Log-in Buy