Engines / Diesel / 2.5/128/96 kW TDI BPC; BNZ / Test of Lambda probe

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
• fuse lambda sonda - OK
• engine temperature > XX°C

connect with the control unit XX - engine

XX - Basic settings group XXX

Start

OFF/ON/next

observe values:

field X
field X
field X

follow the diagnostics instructions -> depress and hold: brake pedal + depress and hold: accelerator pedal

required value:

field X = SystOK

if values are not achieved: check of error memory

End of test

Log-in Buy