Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Engines / Diesel / COMMON PROCEDURES / DPF regeneration - PD engines CAN
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 2x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- ignition ON
- engine speed = idling
- engine temperature > XX °C (XX - Measured values group XXX, field X)
- clogging of Diesel particulate filter < MAX (XX - Measured values group XXX, field X)
- appliances ON (Headlights, air-conditioning, Seat heating)
Note:
If the filter is clogged above the maximum value, it is necessary to replace it with a new filter otherwise there is a risk of fire during regeneration!
Conditions - test drive
- speed XX-XX km/h
- engine speed XXXX-XXXX rpm
- engaged gear (X) or (X) or (Tiptronic)
- duration XX-XX minutes
- temperature upstream of component: turbo blower > XXX °C
- second mechanic necessary!
Check of clogging level of Diesel particulate filter
connect with the control unit XX - engine
XX - Measured values group XXX, XXX
observe values: group XXX
field X = xxxxxxX = regeneration
field X = xxxxxXx = rapid regeneration
field X = regeneration counter
observe values: group XXX
field X = temperature upstream of component: catalyst
field X = temperature upstream of component: Diesel Particulate Filter
field X = clogging of Diesel particulate filter
field X = temperature downstream of component: Diesel Particulate Filter
ascertaining the km and time since last regeneration
connect with the control unit XX - engine
XX - Measured values group XXX, XXX
observe values: group XXX
field X = previous regeneration - distance
observe values: group XXX
field X = previous regeneration - time
DPF regeneration
connect with the control unit XX - engine
XX - Login / XX - Coding II / XX - Security access
enter value: XXXXX
Start
do a test drive if filter clogging is not close to X
XX - Measured values group XXX, XXX
observe values: group XXX
field X = xxxxxxX = regeneration
field X = xxxxxXx = rapid regeneration
field X = regeneration counter
observe values: group XXX
field X = temperature upstream of component: catalyst
field X = temperature upstream of component: Diesel Particulate Filter
field X = clogging of Diesel particulate filter
field X = temperature downstream of component: Diesel Particulate Filter
Note:
If regeneration fails or it is incomplete, probable error in procedure or engine.
Created on: XX.X.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Jan)
- ignition ON
- engine speed = idling
- engine temperature > XX °C (XX - Measured values group XXX, field X)
- clogging of Diesel particulate filter < MAX (XX - Measured values group XXX, field X)
- appliances ON (Headlights, air-conditioning, Seat heating)
Note:
If the filter is clogged above the maximum value, it is necessary to replace it with a new filter otherwise there is a risk of fire during regeneration!
Conditions - test drive
- speed XX-XX km/h
- engine speed XXXX-XXXX rpm
- engaged gear (X) or (X) or (Tiptronic)
- duration XX-XX minutes
- temperature upstream of component: turbo blower > XXX °C
- second mechanic necessary!
Check of clogging level of Diesel particulate filter
connect with the control unit XX - engine
XX - Measured values group XXX, XXX
observe values: group XXX
field X = xxxxxxX = regeneration
field X = xxxxxXx = rapid regeneration
field X = regeneration counter
observe values: group XXX
field X = temperature upstream of component: catalyst
field X = temperature upstream of component: Diesel Particulate Filter
field X = clogging of Diesel particulate filter
field X = temperature downstream of component: Diesel Particulate Filter
ascertaining the km and time since last regeneration
connect with the control unit XX - engine
XX - Measured values group XXX, XXX
observe values: group XXX
field X = previous regeneration - distance
observe values: group XXX
field X = previous regeneration - time
DPF regeneration
connect with the control unit XX - engine
XX - Login / XX - Coding II / XX - Security access
enter value: XXXXX
Start
do a test drive if filter clogging is not close to X
XX - Measured values group XXX, XXX
observe values: group XXX
field X = xxxxxxX = regeneration
field X = xxxxxXx = rapid regeneration
field X = regeneration counter
observe values: group XXX
field X = temperature upstream of component: catalyst
field X = temperature upstream of component: Diesel Particulate Filter
field X = clogging of Diesel particulate filter
field X = temperature downstream of component: Diesel Particulate Filter
Note:
If regeneration fails or it is incomplete, probable error in procedure or engine.
Created on: XX.X.XXXX XX:XX:XX Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved. (Jan)
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.