Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Engines / Diesel / EDC 15 general / basic settings
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 2x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- engine speed = idling
- number of faults = X
connect with the control unit XX - engine
settings - exhaust recirculation - EGR
XX - Basic settings group XXX
Start
required values: - closed
field X = XXXX..XXXX rpm (engine speed)
field X = X .. XX % (Exhaust gas recirculation valve)
field X = XXX ... XXX mg/stroke
required values: - open
field X = XXXX..XXXX rpm (engine speed)
field X = XX..XX % (Exhaust gas recirculation valve)
field X = XXX ... XXX mg/stroke
settings - turbo blower
XX - Basic settings group XXX
Start
the turbo blower is now alternately switched X...XX % a XX...XXX %.
required values:
field X - filling pressure value between active and inactive state must be >= XX mbar
settings - fuel pump
XX - Basic settings group XXX
Start
fuel pump - switches
settings - kick-down (automatic transmission - only)
XX - Basic settings group XXX
Start
depress and hold - accelerator pedal
required values:
field X = ADP-OK
switch ignition off for: XX s.
Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
- engine speed = idling
- number of faults = X
connect with the control unit XX - engine
settings - exhaust recirculation - EGR
XX - Basic settings group XXX
Start
required values: - closed
field X = XXXX..XXXX rpm (engine speed)
field X = X .. XX % (Exhaust gas recirculation valve)
field X = XXX ... XXX mg/stroke
required values: - open
field X = XXXX..XXXX rpm (engine speed)
field X = XX..XX % (Exhaust gas recirculation valve)
field X = XXX ... XXX mg/stroke
settings - turbo blower
XX - Basic settings group XXX
Start
the turbo blower is now alternately switched X...XX % a XX...XXX %.
required values:
field X - filling pressure value between active and inactive state must be >= XX mbar
settings - fuel pump
XX - Basic settings group XXX
Start
fuel pump - switches
settings - kick-down (automatic transmission - only)
XX - Basic settings group XXX
Start
depress and hold - accelerator pedal
required values:
field X = ADP-OK
switch ignition off for: XX s.
Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.