Engines / Petrol / 1.2/47kW AZQ/BME/BXV/BZG / Test - Lambda-sensor downstream of catalyst


Mark Model Control unit Diagnostic operation
Displayed 1-20 records out of 100. << < 1 > >>
Mark
Model
Control unit
Diagnostic operation
Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and  You will get login to diagnostic procedures database imediatelly.

Volkswagen workshop manuals for diagnostics

Log-in Buy

Conditions:
- exhaust system - tightness of line - OK
- engine temperature > XX °C
- catalyst temperature > XXX °C (XX - Measured values
group XXX field X)

Start the engine

wait XXX s


connect with the control unit XX - engine


XX - Measured values group XXX

required values field X (Lambda-sensor upstream of catalyst):
xxxxX =
lambda control = active

xxxXx =
lambda control = readiness for operation
xx?xx = heating of lambda probe(s)


increase rpm to XXXX rpm


XX - Measured values group XXX
required values
field X = XXXX rpm

field X > XXX °C



XX - Measured values group XXX
required values field X (Lambda-sensor downstream of catalyst):
Xxxx =
lambda control = active

xxXx =
lambda control = readiness for operation
x?xx = heating of lambda probe(s)



XX - Basic settings group XXX
activate default settings

sharply depress - brake pedal + accelerator pedal

the control unit increases the engine speed

required values
field X = TEST ON

wait

required values
field X = BX-SX OK

upon achievement of values


release brake pedal + accelerator pedal


XX - Basic settings
group XXX
activate default settings

sharply depress - brake pedal + accelerator pedal

the control unit increases the engine speed

required values
field X = X,XX - X,X V
field X = TEST ON -> BX-SX OK

may take several minutes

XX - end of communication


switch-off the engine



if continuously displayed field X > X,X V - check component:
-
Lambda-sensor downstream of catalyst - line - short-circuit to + XXV
-
Lambda-sensor downstream of catalyst - short-circuit to + XXV


if continuously displayed field X < X,XX V - check component:
-
Lambda-sensor downstream of catalyst - line - short-circuit to GND
-
Lambda-sensor downstream of catalyst - short-circuit to GND


if continuously displayed field X = X,XX - X,X - check component:
-
Lambda-sensor downstream of catalyst - line - shut-off
-
Lambda-sensor downstream of catalyst - shut-off

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and  You will get login to diagnostic procedures database imediatelly.

Volkswagen workshop manuals for diagnostics

Log-in Buy