Engines / Petrol / 1.4/55 kW AMF; AUA; AXP; BCA / 15-Readiness Code - load

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- appliances OFF
- engine temperature > XX °C
- catalyst temperature > XXX °C (XX - Measured values group XXX field X)

connect with the control unit XX - engine

XX - readiness
field X = exhaust recirculation
field X = heating of lambda probe(s)
field X = Lambda sensor(s)
field X = air-conditioning
field X = secondary air system
field X = aeration of fuel tank
field X = heating of catalyst
field X = catalyst

required values: XXXXXXXX

if values are not achieved - create readiness

Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.

Log-in Buy