Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Engines / Petrol / 1.6/75 kW BFQ; AVU / 15-Readiness Code - creation
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
This operation was considered useful 1x.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- appliances OFF
- engine temperature > XX °C (XX - Measured values group XXX field X)
- catalyst temperature > XXX °C (XX - Measured values group XXX field X)
- intake air temperature > XX °C (XX - Measured values group XXX field X)
- number of faults = X
Start the engine
connect with the control unit XX - engine
XX - Basic settings group XXX
Start
required values:
field X = Sys-OK (may take several minutes)
if values are not achieved - check of error memory
XX - Basic settings group XXX
Start
increase rpm to XXXX - XXXX rpm
required values:
field X = OK (may take several minutes)
if values are not achieved - do a test drive, check of error memory, test of components: catalyst
XX - Basic settings group XXX
Start
depress and hold - brake pedal
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved - do a test drive, check of error memory, test of components: Lambda sensor(s) SX
XX - Basic settings group XXX
Start
depress and hold - brake pedal
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved - do a test drive, check of error memory, test of components: Lambda sensor(s) SX
XX - Basic settings group XXX
Start
required values:
field X = Sys-OK (may take several minutes)
check download of the readiness code of the readiness functions
Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
- appliances OFF
- engine temperature > XX °C (XX - Measured values group XXX field X)
- catalyst temperature > XXX °C (XX - Measured values group XXX field X)
- intake air temperature > XX °C (XX - Measured values group XXX field X)
- number of faults = X
Start the engine
connect with the control unit XX - engine
XX - Basic settings group XXX
Start
required values:
field X = Sys-OK (may take several minutes)
if values are not achieved - check of error memory
XX - Basic settings group XXX
Start
increase rpm to XXXX - XXXX rpm
required values:
field X = OK (may take several minutes)
if values are not achieved - do a test drive, check of error memory, test of components: catalyst
XX - Basic settings group XXX
Start
depress and hold - brake pedal
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved - do a test drive, check of error memory, test of components: Lambda sensor(s) SX
XX - Basic settings group XXX
Start
depress and hold - brake pedal
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved - do a test drive, check of error memory, test of components: Lambda sensor(s) SX
XX - Basic settings group XXX
Start
required values:
field X = Sys-OK (may take several minutes)
check download of the readiness code of the readiness functions
Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.