Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Engines / Petrol / 1.8/132 kW AUQ / 15-Readiness Code - creation
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- appliances OFF
- engine temperature > XX °C
- catalyst temperature > XXX °C (XX - Measured values group XXX field X)
- number of faults = X
connect with the control unit XX - engine
XX - Basic settings group XXX
Start
required values:
field X = ADP-OK
Start the engine
XX - Basic settings group XXX
Start
Model year: < XX/XXXX
increase rpm to: approx XXXX rpm
Model year: XX/XXXX<
depress: brake pedal + accelerator pedal
the control unit increases the engine speed
required values:
field X = XXX -> XXX (may take several minutes)
field X = XXX
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = sys-OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = RX-OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = TEV-OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
sharply depress: - accelerator pedal - on the floor
permit - accelerator pedal
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = sys-OK (may take several minutes)
check download of the readiness code of the readiness functions
Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
- appliances OFF
- engine temperature > XX °C
- catalyst temperature > XXX °C (XX - Measured values group XXX field X)
- number of faults = X
connect with the control unit XX - engine
XX - Basic settings group XXX
Start
required values:
field X = ADP-OK
Start the engine
XX - Basic settings group XXX
Start
Model year: < XX/XXXX
increase rpm to: approx XXXX rpm
Model year: XX/XXXX<
depress: brake pedal + accelerator pedal
the control unit increases the engine speed
required values:
field X = XXX -> XXX (may take several minutes)
field X = XXX
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = sys-OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = RX-SX OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = RX-OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
engine speed = high rpm
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = TEV-OK (may take several minutes)
if values are not achieved: check of error memory
XX - Basic settings group XXX
Start
sharply depress: - accelerator pedal - on the floor
permit - accelerator pedal
required values:
field X = TEST ON (may take several minutes)
wait
required values:
field X = sys-OK (may take several minutes)
check download of the readiness code of the readiness functions
Created on: XX.XX.XXXX XX:XX:XX (hnz) Copyright © XXXX-XXXX, AutoComSoft Ltd All rights reserved.
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.