Engines / Petrol / 2.0/110kW FSI AXW / catalyzator desulphurisation

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Note:
- In case of incorrect operation, the catalyst may be excessively contaminated by sulphur, which distorts the fuel mixture and increases fuel consumption
- observe the occupation safety rules when taking a test drive with connected diagnostics tester !!!

Conditions:
- second mechanic necessary !!!
- engine temperature > XX °C (XX - Measured values group XXX field X)

Start the engine

connect with the control unit XX - engine

XX - Basic settings group XXX
activate default settings

do a test drive - full load

required values
field X > XXX °C

upon achievement of values - increase speed on MIN XXX km/h

required values
field X > XXX °C
field X = active

wait - speed = MIN XXX km/h

required values
field X = X,XX - X,XX (fluctuates)
field X = OK (may take several minutes)

upon achievement of values - end the test drive

XX - end of communication

Log-in Buy