Diagnostic procedures for a VAG diagnostics
Database for coding vehicle control units Volkswagen - VAG
Software versions
VIN - Code validator
Engines / Petrol / ME 7.1.1 general / creation of Readiness (AZZ)
Search:
Search area:
| Mark | Model | Control unit | Diagnostic operation |
|---|
Mark 
Model
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Note:
- appliances = OFF
- The readiness Code must be created as the last diagnostics task. Later deletion of the memory could also result in deletion of the created readiness Code.
connect with the control unit XX - engine
XX - Deleting error memory
XX - end of communication
switch ignition off for XX s
switch on the ignition
Start the engine - engine speed = idling
XX - Basic settings group XXX
activate default settings
required values
field X = xxXXXXXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
fully depress - brake pedal
fully depress -accelerator pedal
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = OK
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = OK
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
release - accelerator pedal
release - brake pedal
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxXXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxXXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxxXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxxXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxxXXX
end
- appliances = OFF
- The readiness Code must be created as the last diagnostics task. Later deletion of the memory could also result in deletion of the created readiness Code.
connect with the control unit XX - engine
XX - Deleting error memory
XX - end of communication
switch ignition off for XX s
switch on the ignition
Start the engine - engine speed = idling
XX - Basic settings group XXX
activate default settings
required values
field X = xxXXXXXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
fully depress - brake pedal
fully depress -accelerator pedal
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = OK
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = OK
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
brake pedal + accelerator pedal = XXX%
XX - Basic settings group XXX
activate default settings
brake pedal + accelerator pedal = XXX%
the control unit increases the engine speed - XXXX rpm
required values
field X = xxxxxXXX
upon achievement of values - continue
release - accelerator pedal
release - brake pedal
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxXXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxXXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxxXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxxXXX
upon achievement of values - continue
XX - Basic settings group XXX
activate default settings
engine speed = idling
required values
field X = xxxxxXXX
end
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.