Engines / Petrol / ME 7.5.20 general / adaptation - throttle valve

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in

Conditions:
- on-board voltage >XX V (XX - Measured values group XXX field X
- intake air temperature > X °C
- engine speed = X

Note:
- done after replacement of component: throttle valve, engine control unit
- done after repair of components: throttle valve, engine control unit

connect with the control unit XX - engine

accelerator pedal - released !!!

XX - Basic settings group XXX
activate default settings

wait

required values
field X = ADP-OK

upon non--achievement of condition - check component:
- throttle valve
- line engine control unit -> throttle valve

XX - end of communication

switch ignition off for XX s

check of error memory

Log-in