Engines / UDS Engines by part number / 69 - Trailer functions [EV_ECM20TDI01103L906018BQ 003006] / Adaptation of injection valve after replacement

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Part 1 of the order number Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Part 2 of the order number Select the first six characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not enter the ordering number from the control unit packaging here!!!

Select the first six characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not enter the ordering number from the control unit packaging here!!!

Part 3 of the order number Select the first nine characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW ordering number field. Do not enter the ordering number from the control unit packaging here!!!

Select the first nine characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW ordering number field. Do not enter the ordering number from the control unit packaging here!!!

Part 4 of the order number Select the order number of the engine control unit. This number can be found in the VCDS after connecting to the uniform in the SW ordering number field. Do not insert the ordering number from the control unit packaging here!!!

Select the order number of the engine control unit. This number can be found in the VCDS after connecting to the uniform in the SW ordering number field. Do not insert the ordering number from the control unit packaging here!!!

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

This operation was considered useful 2x.

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- done after replacement of component: injector

Note:

Adaptation may be done ONLY if any of the injectors was really replaced !!!

Adaptation at a time other after replacement of an injector may cause driving problems

connect with the control unit XX - engine

XX - Security access

enter value:

XXXXX = function accessible: adaptation

Start

XX - Adaptation

injector X

select item in menu: IDEXXXXX - corrective value - injector X

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

enter value:     injector code X

TIP! The injector code is on the injector. It is a seven-digit alphanumeric code.

for instance: injector code AXBXCXX enter as AXBXCXX

Start

XX - Basic settings

select item in drop-down menu:

IDEXXXXX - zeroing learning values: corrective value - injector X

activate default settings

desired condition: Successfully completed

injector X

select item in menu: IDEXXXXX - corrective value - injector X

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

enter value:     injector code X

TIP! The injector code is on the injector. It is a seven-digit alphanumeric code.

for instance: injector code AXBXCXX enter as AXBXCXX

Start

XX - Basic settings

select item in drop-down menu:

IDEXXXXX - zeroing learning values: corrective value - injector X

activate default settings

desired condition: Successfully completed

injector X

select item in menu: IDEXXXXX - corrective value - injector X

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

enter value:     injector code X

TIP! The injector code is on the injector. It is a seven-digit alphanumeric code.

for instance: injector code AXBXCXX enter as AXBXCXX

Start

XX - Basic settings

select item in drop-down menu:

IDEXXXXX - zeroing learning values: corrective value - injector X

activate default settings

desired condition: Successfully completed

injector X

select item in menu: IDEXXXXX - corrective value - injector X

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

enter value:     injector code X

TIP! The injector code is on the injector. It is a seven-digit alphanumeric code.

for instance: injector code AXBXCXX enter as AXBXCXX

Start

XX - Basic settings

select item in drop-down menu:

IDEXXXXX - zeroing learning values: corrective value - injector X

activate default settings

desired condition: Successfully completed

XX - end of communication

switch ignition off for XXs

End of test.

Log-in Buy