Engines / UDS Engines by part number / 01 - Engine [EV_ECM16TDI02103L906023AG 003006] / Measurement of compression pressure

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Part 1 of the order number Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- engine temperature > XX °C
- connect battery charger

connect with the control unit XX - engine

XX - Basic settings

select item in drop-down menu: IDEXXXXX - Measurement of compression pressure X

Start

In the Basic Settings window, click Measured values and select the items you want to visualize.

IDEXXXXX-ENGXXXXXX - Measurement of compression pressure X-N_CMP_TEST[X]
IDEXXXXX-ENGXXXXXX - Measurement of compression pressure X-N_CMP_TEST[X]
IDEXXXXX-ENGXXXXXX - Measurement of compression pressure X-N_CMP_TEST[X]
IDEXXXXX-ENGXXXXXX - Measurement of compression pressure X-N_CMP_TEST[X]

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

manual gearbox:
depress and hold: brake pedal + clutch pedal

automatic transmission:
depress and hold: brake pedal + accelerator pedal

starter XXs (engine does not Start)

pozorovat hodnoy:

IDEXXXXX-ENGXXXXXX - Measurement of compression pressure X-N_CMP_TEST[X]
IDEXXXXX-ENGXXXXXX - Measurement of compression pressure X-N_CMP_TEST[X]
IDEXXXXX-ENGXXXXXX - Measurement of compression pressure X-N_CMP_TEST[X]
IDEXXXXX-ENGXXXXXX - Measurement of compression pressure X-N_CMP_TEST[X]

record values measured in fields X - X. Add-up the values for the individual cylinders and divide by X, you thus get the average starting rpm. For example. (XXX+XXX+XXX+XXX)/X = XXX,XX. The values of the individual cylinders must not differ from the average starting rpm by more than X rpm. To increase precision, it is possible to repeat the test.

Log-in Buy