Engines / UDS Engines by part number / 01 - Engine [EV_ECM14TFS01104E906016G 002008] / Test - Starter control (J906)

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Part 1 of the order number Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
- ignition = ON
- engine speed = X rpm

connect with the control unit XX - engine

X) mechanical gearbox

Advanced Measured Values

select item in menu:

IDEXXXXX-ENGXXXXXX - Starter control: signal INTERLOCK P/N Bits X-X
IDEXXXXX-ENGXXXXXX - Starter control: terminal XX Bits X-X

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

smoothly depress: clutch pedal

desired condition - IDEXXXXX-ENGXXXXXX:

XX (X dec) = clutch pedal - depressed - &fracXX;
XX (XX dec) = clutch pedal - depressed - on the floor

press button: Start

desired condition - IDEXXXXX-ENGXXXXXX

XX (X dec) - Start

desired condition:

- engine speed = idling

X) automatic transmission

Advanced Measured Values

select item in menu:

IDEXXXXX-ENGXXXXXX cruise control: status - Binary X-X BIT
IDEXXXXX-ENGXXXXXX - Starter control: terminal XX Bits X-X

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

smoothly depress: clutch pedal

desired condition - IDEXXXXX-ENGXXXXXX:

xxxxxxxX (X dec) = brake pedal - depressed (brake light switch)
xxxxxxXx (X dec) = brake pedal - depressed (switch for engine control unit)

press button: Start

desired condition - IDEXXXXX-ENGXXXXXX

XX (X dec) - Start

desired condition:

- engine speed = idling

End of test

Log-in Buy