Engines / UDS Engines by part number / 01 - Engine [EV_ECM14TFS01104E906016AD 002015] / Test: detection of burning failure

Search: Search area:

Mark	Model	Control unit	Diagnostic operation

Mark

Select a vehicle make or a common group such as Service Intervals, Engines, Transmissions, Immobilizers and Independent Heaters.

Model

Part 1 of the order number Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Select the first three characters of the order number of the engine control unit. This number can be found in the VCDS when linked to the uniform in the SW order number field. Do not insert the ordering number from the control unit packaging here!!!

Control unit Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Select the desired control unit as accurately as possible. The UDS identifier EV_xyz can be found in the VCDS after connecting to the control unit and then in the Extended Identification.

Diagnostic operation Select the desired diagnostic procedure.

Diagnostic procedure

You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.

Log-in Buy

Conditions:
•         engine temperature >= XX°C
•         engine speed = idling
•         appliances = ON

connect with the control unit XX - engine

Measurement X

Advanced Measured Values

select item in menu:

IDEXXXXX - detection of burning failure - status
IDEXXXXX - total number of burning failures: cylinder X
IDEXXXXX - total number of burning failures: cylinder X
IDEXXXXX - total number of burning failures: cylinder X
IDEXXXXX - total number of burning failures: cylinder X

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

required values:

IDEXXXXX = activated

Note the measured value: IDEXXXXX, IDEXXXXX, IDEXXXXX, IDEXXXXX

TIP! for this test, it is suitable to use graphical representation

wait XXs - engine speed = idling

Measurement X

Advanced Measured Values

select item in menu:

IDEXXXXX - detection of burning failure - status
IDEXXXXX - total number of burning failures: cylinder X
IDEXXXXX - total number of burning failures: cylinder X
IDEXXXXX - total number of burning failures: cylinder X
IDEXXXXX - total number of burning failures: cylinder X

TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window

required values:

IDEXXXXX = activated

Newly measured values not differ from originally measured by more than

End of test

Log-in Buy