Engines / UDS Engines by part number / 01 - Engine [EV_ECM20TFS0205G0906259E 001007] / Test - fuel pressure regulation vlave (N276)
Mark | Model | Control unit | Diagnostic operation |
---|
Mark
Model
Part 1 of the order number
Part 2 of the order number
Part 3 of the order number
Part 4 of the order number
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- ignition = ON
- engine speed = idling
Note:
X bar = X,X MPa
X bar = XXX kPa
X bar = XXXX hPa
X bar = XXXXXX Pa
connect with the control unit XX - engine
wait XX s
Advanced Measured Values
select item:
X) IDEXXXXX - fuel pressure - high: required values
X) IDEXXXXX - fuel pressure - high: actual value
X) IDEXXXXX - Fuel metering valve
TIP: For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
Start
required values:
X)
fuel pressure - high: actual value = XX-XX MPa (XXX-XXX bar)
X)
required values <-> actual value: the maximum permissible difference is: X Mpa (XXXX kPa, XX bar)
X)
Fuel metering valve - alternating = XX - XX %
Picture documentation:
if values are not achieved - check component:
- Low-pressure Fuel system
- fuel pressure regulation vlave (NXXX)
- pressure sensor - fuel pressure
- Fuel metering valve
- hipressure pump
- ignition = ON
- engine speed = idling
Note:
X bar = X,X MPa
X bar = XXX kPa
X bar = XXXX hPa
X bar = XXXXXX Pa
connect with the control unit XX - engine
wait XX s
Advanced Measured Values
select item:
X) IDEXXXXX - fuel pressure - high: required values
X) IDEXXXXX - fuel pressure - high: actual value
X) IDEXXXXX - Fuel metering valve
TIP: For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
Start
required values:
X)
fuel pressure - high: actual value = XX-XX MPa (XXX-XXX bar)
X)
required values <-> actual value: the maximum permissible difference is: X Mpa (XXXX kPa, XX bar)
X)
Fuel metering valve - alternating = XX - XX %
Picture documentation:
if values are not achieved - check component:
- Low-pressure Fuel system
- fuel pressure regulation vlave (NXXX)
- pressure sensor - fuel pressure
- Fuel metering valve
- hipressure pump
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.