Engines / UDS Engines by part number / 01 - Engine [EV_ECM15CSI01105E906018L 002004] / Test of engine temperature sensor - outlet from radiator (G83)
Mark | Model | Control unit | Diagnostic operation |
---|
Mark
Model
Part 1 of the order number
Part 2 of the order number
Part 3 of the order number
Part 4 of the order number
Control unit
Diagnostic operation
Diagnostic procedure
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.
Conditions:
- engine temperature = ambient temperature
connect with the control unit XX - engine
Start the engine
engine speed = idling
wait XXs
Advanced Measured Values
select item in menu: IDEXXXXX - temperature of cooling liquid - radiator outlet
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
required value:
temperature of cooling liquid - radiator outlet - actual value (-XX°C .. + XXX°C)
(values must rise smoothly, it is recommended to use a graphics display for this function)
TIP! Move the line and connector connection on the sensor and observe whether the values do not change sharply
if values are not achieved - check component:
- cooling temperature sensor - radiator outlet
- wiring
- connector connections
- connector - measure resistance between terminals - required values:
XX°C - XX °C = X,X kOhm
XX°C - XX°C = X,X kOhm
- engine temperature = ambient temperature
connect with the control unit XX - engine
Start the engine
engine speed = idling
wait XXs
Advanced Measured Values
select item in menu: IDEXXXXX - temperature of cooling liquid - radiator outlet
TIP! For easier search in the menu, enter the code IDE, ENG or MAS into the "Filter" window
required value:
(values must rise smoothly, it is recommended to use a graphics display for this function)
TIP! Move the line and connector connection on the sensor and observe whether the values do not change sharply
if values are not achieved - check component:
- cooling temperature sensor - radiator outlet
- wiring
- connector connections
- connector - measure resistance between terminals - required values:
XX°C - XX °C = X,X kOhm
XX°C - XX°C = X,X kOhm
You are not logged! System works in DEMO mode only now where numbers are replaced with X characters. For 49 EUR only You will get access into full system. You can pay by credit card or bank transfer. Click BUY button for purchase and You will get login to diagnostic procedures database imediatelly.